17
● When recycling the machine, some inner parts can be recycled to use
again. Please pay attention to recycle them for environmental protection.
Transport and recycle
Transport
Recycle
● Please save the packaging of the coffee machine for
future transportation.
● Make sure to empty water inside the machine before
transportation, otherwise, it will damage the machine
● After emptying the waterway, please wipe the machine
both inside and outside to dry.
● Once the empty waterway program was executed, the
system will rerun to the program of “first-time use”, when
the coffee machine is used again.
● While emptying the waterway, there will be a
high-temperature steam sprays from coffee spout. Please
pay special attention to avoid being scalded.
● Please empty the water system in “water tank” mode.
The machine is on the status of “READY”.
Enter program setting and ‘Machine’
and select ‘Factory reset’.
Display “EMPTY UNIT” and confirm. Turn off
the water supply or remove water tank,
then machine begins to clean up the
waterway automatically .After emptying
the waterway, the machine will
automatically power off. Take the drip
tray out after the power is switched off,
and clean the water in the drip tray.
To Next Page
Loading...
