07
Instructions for first-time use
This chapter will help you understand the basic operations
and settings for your first time use.
● As the machine has been tested at factory, there may be a
little coffee powder left . We promise the machine is brand
new.
● The coffee machine will start self-testing and cleaning at the
first-time use, this helps the coffee machine achieve the best
working condition, and this process cannot be skipped.
● During the cleaning process, some hot water may flow out of
the coffee spout into the drip tray.
● Please avoid contacting the spilling hot water.
● Step1： Only purified water at room temperature is allowed
to fill in the water tank(The amount of water in the water tank
cannot exceed the height of the MAX mark) .
● Step2：Fill beans into the bean container.
● Step3：Connect to power .
● Step4：Please turn on the power switch on the back of the
coffee machine.
● Step5：Pressing power button to activate the appliance.
● Please adjust the fineness of coffee bean powder according
to the coffee beans.
● Please don’t adjust the grinding wheel when the grinder is
running, or the grinder will be damaged.
● During making coffee, if the coffee outflows very slowly or
completely does not outflow, please set it to the rough
mode 4 or 5.
● The rotary selector on the top of the appliance adjusts the
degree of grinding from fine(mode1) to coarse(mode5) as
required. Factory setting is mode 3.
● If your coffee beans are in dark color, it is recommended to
set to the rough mode 4 or 5.
● The adjustment of grinding wheel will be effective only after
making two or more cups of coffee.
Power on
Grinding wheel
rough
rough plus
normal
fine
fine minus
To Next Page
Loading...
