Kalkomat Boxer - List of Connectors

17
List of connectors:
J1 – connector for coin acceptor
J2 – connector for bill acceptor
J3 – connector for power supply to bill acceptor,
ticket dispenser, capsule dispenser, thermal
printer
J4 - connector for ticket dispenser, capsule
dispenser, thermal printer
J7 & J5 – front panel backlight
J6 – connector for main board power supply (12V
supplied by AC power supply)
J8 – connector for power supply
J9 – sensor connector
J10 – connector for buttons GAME and START
J11 – connector for mechanical counter
J12 – connector for speaker
S1 – service setting switches
S2 – step potentiometer for setting sensor sensitivity
(0 – min, 9 - max)
SW1 & SW2 – help buttons (up/down)
R362 – potentiometer for volume control
IC37 – speech synthesizer
IC34 – main processor socket
LED-A and LED-B - connector for wheel LEDs
PRINTER - connector for thermal printer
BOXNET/ TOURNAMENT - connector for BoxNet
or BoxTournament for PC