b. The top left corner equipment list: Click to return to the search device interface.
c. Ca, Mg, KH, K is the name of the pump head, can be set by user. The default
name is pump-1, pump-2, pump-3, pump-4.
d. Day add: The total amount added per day
The automatic mode plan list lists the pump head additions each hour within 24 hours
of the day, which "--:--" indicates that the pump is not running within that hour;
The custom plan list lists the user-defined start add plan of the pump in a day.
2.3.2 Plan setting
Plan setting interface
a. Plan mode
Setup the plan mode of the dosing pump, automatic mode or custom mode.
b. Anti-chemical interference
Setting up the chemical interference time of the dosing pump, preventing the
elements from adding chemical interference at the same time, preventing
chemical interference time is only valid for the automatic mode, which does not
work for the custom mode.
To Next Page
Loading...
