To Next PageTo Next Page
Need help?Do you have a question about the Kane 258 and is the answer not in the manual?
General| Measures | O2 |
|---|---|
| Calculates | CO2 |
| Fuel types | Natural Gas, Coal |
| Display | LCD |
| Data logging | Yes |
| Connectivity | Bluetooth |
| Resolution | O2: 0.1%; CO: 1 ppm |
| Response Time | <30 seconds |
| Temperature range | -4 to 1112°F (-20 to 600°C) |
| Dimensions | 220 x 100 x 50 mm |
Explains the function of each button on the instrument's keypad.
Identifies and explains the layout of front, rear, and side analyser components.
Highlights critical safety precautions for using the analyser and its magnetic cover.
Details electrical safety standards and operating conditions for the analyser.
Describes how to turn on the analyser and initiate zero calibration.
Guides on correctly positioning the flue probe and safety precautions during measurement.
Explains how the CO sensor is protected from high CO levels.
Guides on connecting thermocouples for temperature measurement and display.
States the requirement for annual recertification of analysers and pressure meters.
Explains how to extend the analyser's warranty up to 10 years.
Guides users on registering their KANE analyser to create a KAM dashboard.
Lists KAM dashboard features and provides support contact information.
Outlines the process for analyser service and recertification with same-day despatch.
Warns about the effects of cold on the analyser and how to mitigate damage.
