16 KANE 258 MANUAL
MENU ITEMS
MENU ITEM MENU TEXT OPTIONS/COMMENTS
TIME TIME
HH:MM:SS format
E.g.. 7am = 07:00:00, 7pm = 19:00:00
DATE DATE DD/MM/YY format
HEADER HEADER Edit the 2 Line Header on your printouts
LOGS LOGS
View current memory usage & stored
reports
EFFICIENCY EFF
Eciency calculation analyser set to
Gross or Net —
Condensing automatically selected
based on selected fuel type
GAS SCALE ppm/mg
Select, ppm, ppm(n), mg/m3, mg/m3(n),
mg/kWh, mg/kWh(n)
PRINTER TYPE IR PRINT Select, KMIRP, IRP-2
02 REF 02 REF
Used for “Normalised” readings.
Default set to 3%, can be adjusted up or
down
LANGUAGE LANG Select required language from the list
CODE CODE
Eciency calculation analyser set to
Gross or Net —
Condensing automatically selected
based on selected fuel type
MEASURING FLUE GASSES
After countdown is nished & your analyser is correctly set up, put its
ue probe into the appliance’s sampling point. The probe tip should be
in the centre of the ue – use the ue probe’s depth stop cone to set the
position.
With balanced ues, make sure the probe is positioned far enough into
the ue so no air can “back ush” into the probe.
SAFETY WARNING
Ensure your ue probe handle does not get hot!
To Next Page
Loading...
