11KANE 258 MANUAL
FIRST TIME USE
Charge your KANE258’s batteries for 8 hours - An overnight charge
should be sucient for an average 8-hour day.
Take time to read this manual fully & be aware your analyser’s
conguration may not support all features explained in this manual.
Take time to set it up to your requirements before using your analyser.
NOTE: Your analyser’s STATUS bar displays current time, date &
battery status - Check time & date are correct as they can only be
changed when you have no stored logs in Memory to protect the
integrity of your stored data.
GENERAL OPERATING PRINCIPLE
Using your KANE258 is simple with the rotary dial & user interface. Most
tests can be made with little user activity.
Your analyser’s status bar oers options based on tasks you are
performing & displays useful information & messages.
QUICK START
Turn on your KANE258 pressing the button for 2 seconds until it
starts. Your KANE258 starts a 30 second zero calibration - once
completed select the tests you want by turning the analyser’s rotary dial.
USER INTERFACE
Your KANE258’s large display shows 5 lines of tests & a status bar. The
backlight activates on each button press then turns o after 10 seconds.
Navigate through your options & menu choices via the 3 dedicated
& buttons.
Button presses are either short or long presses.
To Next Page
Loading...
