KanexPro HDEXT50M - Panel Description

HDEXT50M
6 | P a g e
1.3 Package List
• 1 x Transmitter
• 1 x Receiver
• 1 x Wideband IR TX cable
• 1 x Wideband IR RX cable
• 1 x Power adapter (DC 5V 1A)
• 1 x User Manual
Note: If there are defective parts or parts are missing, please contact your local
dealer(s).
2. Panel Description
Transmitter (TX)
① CAT OUT: RJ45 connector with
Green (when powered on) & Yellow
(when linked successfully between
transmitter and receiver) indicators.
Connect to Receiver over CATx
cable.
② IR IN: Connect with IR Receiver.
③ IR OUT: Connect with IR Emitter.
④ DC 5V: Micro USB, connect to the
power adaptor.
⑤ HDMI IN: Connect to HDMI source.
⑥ HDMI OUT: HDMI loop output,
connect to display.
⑦ RESET: Reboot.
Receiver (RX)
HDMI OUT
HDMI IN
DC 5V
IR OUTIR IN CAT OUT
RESET
1
2
3
4
5
6
7
EQ SETTING
IR OUTIR IN CAT IN
1
2
3
4
5
HDMI OUT