Kanmor tekmarNet 4 - Address Error; Room Sensor Circuit Errors; Cool Member Error

19 of 24 © 2011 D 538e - 02/11
Error Messages (2 of 4)
Error Message Description
ADDRESS ERROR This thermostat and another device have been manually given the same tekmarNet
®
address.
Error clears automatically once this thermostat is given a new manually set address or if the thermostat is set to automatic addressing. ROOM SENSOR SHORT CIRCUIT The built-in air temperature sensor has a short circuit fault. Do not confuse this error with the auxiliary room sensor short circuit error. This error cannot be field repaired. Contact your wholesaler or kanmor sales representative for details on repair procedures. ROOM SENSOR OPEN CIRCUIT The built-in air temperature sensor has an open circuit fault. Do not confuse this error with the auxiliary room sensor short circuit error. This error cannot be field repaired. Contact your wholesaler or kanmor sales representative for details on repair procedures. COOL MEMBER ERROR Switch setting #3 has been selected to join a cooling group as a member, yet there is no cooling group master thermostat. Error clears once the thermostat detects a cool group master or switch setting #3 is set to none.