Need help?Do you have a question about the kansai FBX Series and is the answer not in the manual?
Explains how to read the serial number and date of manufacture on the machine.
Specifies the stitch type for the machine series.
Lists model-specific specifications like needles, threads, and widths.
Provides a diagram illustrating the overall machine dimensions and layout.
Details recommended needle types and sizes for the machine.
Explains the procedure and precautions for replacing a needle.
Guides the user through the process of threading the machine correctly.
Details recommended operating speeds and pulley rotation direction for optimal performance.
Covers motor type, belt type, and pulley selection for machine speed adjustment.
Specifies the type of oil to use for lubricating the machine.
Provides instructions on how to properly fill the machine with lubricating oil.
Details the procedure for changing the machine's oil and filter element.
Shows dimensions and layout for cutting the machine table.
Guides the user on correctly mounting the sewing machine onto the table.
Details the correct angle and positioning for the looper and its holder.
Explains how to synchronize the looper's movement with the needle's position.
Specifies the correct distance between the looper and needle at the bottom of the stroke.
Guides on setting the correct height of the needle relative to the needle plate.
Describes how to adjust the front-to-back position of the retainer looper.
Explains the procedure for adjusting the left-to-right position of the retainer looper.
Details how to set the correct height for the retainer looper.
Guides on synchronizing the retainer looper's timing with the needle.
Explains how to adjust the lateral positioning of the feed dog.
Details the front-to-back adjustment of the feed dog.
Guides on setting the correct height of the feed dog.
Provides instructions for adjusting the stitch length and a reference table.
Explains how to adjust the front-to-back position of the needle.
Details how to adjust the forward and backward movement range of the needle.
Describes how to adjust the pressure exerted by the presser foot.
Guides on correctly positioning the presser foot relative to the needle.
Explains how to set the lift height of the presser foot.
Details setting the manual lever and stopper for the rear puller.
Explains how to adjust the pressure of the rear puller.
Guides on setting the fabric feeding amount for the rear puller.
Describes how to adjust thread tension for both needle and looper threads.
Explains how to adjust the position of the needle thread eyelet.
Guides on setting the position of the looper thread take-up eyelet.
Explains the function of the silicon tank and oil for preventing thread issues.
General| Brand | kansai |
|---|---|
| Model | FBX Series |
| Category | Sewing Machine |
| Language | English |
To Next Page
