kansai FX SERIES - User Manual

INSTRUCTION
FX/UTCMANUAL 
Industrial  Sewing  Machines
First published : May 1997
Fourth edition
: January 2006
No. 050153

Summary

Installing the Position Detector

Connecting Relay Cords and Air Lines

FX4404 Connection

Connect relay cords and air lines correctly for the FX4404 model.

FX4406, FX4412 Connection

Connect relay cords and air lines correctly for FX4406 and FX4412 models.

Adjusting Needle Stop Position

Speed Controller and Air Pressure Adjustment

How to Use the Pedal

Adjusting the Thread Trimmer

Movable Knife Position Adjustment

Adjust the movable knife so its base is flush and it's 0.6mm left of the needle hole.

Stationary Knife Position Adjustment

Ensure 0.3mm overlap between stationary and retracted movable knives.

Back Spring Adjustment

Position the back spring correctly to facilitate thread cutting.

Stopper Adjustment

Adjust the stopper to control the protrusion distance of the movable knives.

Knife Assembly Disassembly and Reassembly

Follow procedures to disassemble and reassemble the knife assembly for maintenance.

Adjusting the Air Wiper

Threading and Adjusting the Thread Releaser

For 4-needle Machines

Thread machine and adjust releaser block for needle and looper threads.

For 6- to 12-needle Machines

Thread machine correctly for 6 to 12 needle configurations.

Tension Releaser Adjustment (6 to 12 Needles)

Adjust thread eyelets for needle and looper threads for tension releaser.

kansai FX SERIES Specifications

General

Brand	kansai
Model	FX SERIES
Category	Sewing Machine
Language	English