Need help?Do you have a question about the kansai FX/UTC Series and is the answer not in the manual?
Connect relay cords and air lines for FX4404 model.
Connect relay cords and air lines for FX4406 and FX4412 models.
Adjust the movable knife base and point relative to the needle hole.
Ensure 0.3mm overlap between stationary and movable knives.
Position back spring to hook needle and looper threads for cutting.
Adjust movable knives to touch stopper at specific needle plate distance.
Procedure to disassemble and reassemble the knife assembly for maintenance.
Thread and adjust standby position of releaser for 4-needle machines.
Thread machine correctly for 6 to 12 needle machines.
Adjust tension releaser for 6-12 needle machines by setting thread eyelet distance.
General| Brand | kansai |
|---|---|
| Model | FX/UTC Series |
| Category | Sewing Machine |
| Language | English |
To Next Page
