Need help?Do you have a question about the kansai FBX1106P and is the answer not in the manual?
Detailed instructions for threading the machine, including looper threading and notes on potential issues.
Procedure to synchronize the timing between the upper and lower shafts using timing marks.
Setting the correct angle and position for the looper and its holder bracket.
Adjusting the timing of the looper relative to the needle for proper stitch formation.
Specifies the required distance between the looper point and needle center at bottom stroke.
Adjusting the vertical position of the needle relative to the needle plate.
Adjusting the front-to-back position of the retainer looper.
Adjusting the left-to-right position of the retainer looper.
Adjusting the vertical height of the retainer looper relative to the main looper.
Timing the retainer looper's movement relative to the needle and other loopers.
Ensuring needles align correctly with feed dog drop holes and adjusting feed dog position.
Procedure to adjust the stitch length using the pulley position and a table of stitch lengths.
General| Brand | kansai |
|---|---|
| Model | FBX1106P |
| Category | Sewing Machine |
| Language | English |
To Next Page
