Kantech KT-300 - Kt-300 Door Controller Installation Manual

28 pages

Save Page as PDF

To Next Page

To Previous Page

DN1315-1007

KT-300 Door Controller Installation Manual

VC-485 or USB-485 Multi-function communication interface

Kantech Model Description

Main Page

Table of Contents3
Pre-Installation Information8
- Copyright Information8
- Safety Instructions8
- Components Required to Install KT-3008
- Technical Support8
KT-300 Compliance Specifications9
- FCC & IC Compliance9
- CE Compliance Notice9
- CE & C-Tick Compliance9
- UL Compliance Notice9
- UL 1076 Standard9
Overview10
Technical Specifications11
Electrical Specifications12
KT-300 Controller and Accessories12
Kt-300 Door Controller Installation Manual13
Installing the KT-30014
- Physical Installation14
- Earth Grounding14
- Door Locking Devices14
- Hooking up Inputs15
- Readers and Keypads15
- Relay Controlled Outputs15
- Auxiliary Outputs16
- Tamper Protection16
Connecting the KT-30016
- Connecting to the RS-485 Bus16
- Connecting the Master Controller to the Host PC17
Powering the KT-30018
Installing Combus Modules18
- Introduction to Combus Modules18
- Combus Specifications18
- Combus Repower (if Required)19
- Module Housing Cabinet19
KT-PC4108 - 8-Zone Input Expansion Module20
- KT-PC4108 Introduction20
- KT-PC4108 Specifications20
- Unpacking the KT-PC4108 Module20
- Mounting the KT-PC4108 Module20
- Installation and Wiring20
- Applying Power20
- Assigning the Module20
KT-PC4204 - 4-Relay and Additional Power Supply Module21
- KT-PC4204 Introduction21
- KT-PC4204 Specifications21
- Unpacking the KT-PC420421
- Mounting the KT-PC420421
- Installation and Wiring21
- Applying Power21
- Assigning the KT-PC4204 Module21
KT-PC4216 - 16-Zone Output Expansion Module22
- KT-PC4216 Introduction22
- KT-PC4216 Specifications22
- Unpacking the KT-PC421622
- Mounting the KT-PC421622
- Installation and Wiring22
- Applying Power23
- Assigning the KT-PC4216 Module23
KT3-LCD - Kantech LCD Time & Date Display Module23
- KT3-LCD Introduction23
- KT3-LCD Specifications23
- Unpacking the KT3-LCD23
- Mounting the KT3-LCD23
- Wiring the KT3-LCD24
- Applying Power24
- Assigning the KT3-LCD Keypad24
Troubleshooting Communication Problems24
- Default Initialization24
- How to Use the Default Initialization (Hard Reset)24
- VITAL LED Status Indications24
- Visual Status Indicators (Leds)25
KT-300 Controller Maintenance Recommendations26
KT-300 Wiring Diagram (North American Version)27
KT-300 Wiring Diagram (UE Version)28

Kantech KT-300 - Kt-300 Door Controller Installation Manual

Table of Contents

Related product manuals