T600 Tag Tester
DOC#: UM 360420-835 REVISION F Page 25 of 55
© Kapsch TrafficCom Canada Inc. 2022
These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict confidence
and will be kept confidential and used solely for the purpose intended and for no other purpose and shall not be transmitted, reproduced, copied, and/or used as the basis for
manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.
FILE:UM 360420-835 REV F, T600 OPERATOR AND MAINTENANCE MANUAL.DOCX 03/28/2022 3:02
Configuring log files
The T600 can be configured to record all OBU tests or just OBU tests that result in a failure. These records are added
to a user-specified log file.
Prerequisites: None.
From the Log File information area of the T600 software interface, enter your user information (e.g. your user ID)
in the User/Comment box. This information appears in each log file record.
If you want records for every OBU test, clear the Log only failed tests check box.
If you want records only for OBU test failures, select the Log only failed tests check box.
If you want to record test results to the Log file displayed in the Log File field, no action is required.
If you want to specify a new log file:
Click on New Log file.
Select the text file you want to record test results to. Click Open.
If the text file does not yet exist, create the text file and repeat step b.
The new log file path is displayed in the Log File field of the Log File information area and is ready to
record test results.
To Next Page
Loading...