KAPSCH T600 - Command and Controls

T600 Tag Tester
DOC#: UM 360420-835 REVISION F Page 27 of 55
© Kapsch TrafficCom Canada Inc. 2022
These drawings and specifications contain confidential and proprietary information and are the property of Kapsch TrafficCom Canada Inc. and are issued in strict confidence and will be kept confidential and used solely for the purpose intended
and for no other purpose and shall not be transmitted, reproduced, copied, and/or used as the basis for manufacture or sale of apparatus unless otherwise agreed to in writing by Kapsch TrafficCom Canada Inc.
FILE: UM 360420-835 REV F, T600 OPERATOR AND MAINTENANCE MANUAL.DOCX 03/28/2022 3:02
Kapsch TrafficCom
Command and Controls
Command
How is this command executed?
Who can execute this
command?
What does this command do?
What is the purpose of this
command?
Exit
From the File drop-down menu,
click Exit.
anyone
Closes the T600 Tag Tester
software.
To exit the T600 Tag Tester
software.
Serial Data
Window
From the Settings drop-down menu,
click Serial Data Window.
anyone
Opens the Serial Data Window.
To monitor data to and from
the customer-supplied
computer.
Configuration
From the Settings drop-down menu,
click Configuration.
anyone
Opens the Configuration Dialog
window.
To access the T600 Tag Tester
configuration settings.
About T600 Tag
Tester
From the Help drop-down menu,
click About T600 Tag Tester.
anyone
Opens the About T600 Tag
Tester window.
To view the T600 Tag Tester
version information.
Test Start
Click on Test Start,
or,
press CTRL+A
anyone
Starts the margin and burst
test.
To initiate testing after an OBU
has been placed in the TTU
cradle.