MACRO REMOTE
d. LOWER DOOR CLOSE -
120 minutes
e. STOP -sleep time
disabled
INDICATOR LEDs
The transmitter has two
indicators, a red BATTERY
indicator and a green TRANSMIT
indicator.
The green TRANSMIT indicator
flashes rapidly whenever there is
communication between the
transmitter and the receiver.
The red BATTERY indicator starts
blinking once every second when
the battery voltage is low and
the batteries need charging.
Also the red LED will be steady
red when charging and will turn
off when the charge is complete.
The receiver module can identify
problems with the system in the
form of an error code. Check
the red indicator or display
window on the receiver to
diagnose system problems.
Then, refer to the ERROR CODE
CHART in this manual for
explanation of the error codes.
The green LED indicator will
blink on the receiver during
active operation.
BATTERY CHARGING
Place the transmitter onto the
charging pad button side up. A
solid red LED indicates battery is
charging. Once the internal
battery is fully charged, the LED
will change from red to green. A
fully discharged unit will take up
to 10 hours to charge.
Use only approved chargers
To Next Page
Loading...
