MACRO REMOTE
DESCRIPTION
The MACRO REMOTE is a state
of the art microprocessor based
Radio Frequency (RF) control
system. It will provide the
operator the ability to wirelessly
operate equipment. The
operator is required to follow all
OSHA www.osha.gov safety
standards when operating the
equipment.
The remote control system
consists of several modules: the
radio transmitter, receiver
modules, and associated
optional equipment such as
wiring harnesses and Gate™
interface tools.
The transmitter is equipped with
pushbuttons for the various
functions. This unit runs on a
3.7V rechargeable battery.
The system’s radio receiver has
ON/OFF and PWM outputs to
accommodate the functions
available on the transmitter. All
outputs are current-sourcing. It
also includes a port for RS-232
communication for system
diagnostics.
OPERATION
Power must be applied to the
receiver module for the system
to work.
Pressing the POWER button until
the red and green LEDs appear
will turn on the transmitter.
Pressing and holding the POWER
button until the LEDs stop
toggling will turn off the
transmitter. Pressing the STOP
button will turn off all outputs as
a safety feature. If the
transmitter goes out of range for
To Next Page
Loading...
