Kärcher BP 2 Cistern User Manual (English)

Other manuals for Kärcher BP 2 Cistern

Questions and Answers:

J
Jordan BarnettJul 28, 2025
What to do if my Kärcher BP 2 Cistern does not run?
- G
  gloriarodriguezJul 28, 2025
  If your Kärcher Water Pump stops running or suddenly halts, here's what to check: 1. **Power Supply:** Make sure that fuses and electrical connections are working. 2. **Overheating:** The pump may have overheated and the thermal protection switch turned it off. Disconnect the mains plug, allow the pump to cool, and clean the suction area. Also, make sure to prevent dry running in the future. 3. **Blockage:** Dirt particles might be clogging the suction area. Disconnect the mains plug and thoroughly clean the suction area.
A
April RichAug 6, 2025
Why is my Kärcher Water Pump running but not pumping water?
- M
  Matthew MedinaAug 6, 2025
  If your Kärcher Water Pump is running but not pumping water, consider the following: * **Air in the pump:** Try plugging and unplugging the pump's mains plug a few times to help the fluid get sucked in. * **Blocked Suction Area:** Disconnect the mains plug and clean the suction area to remove any obstructions. * **Low Water Level:** Ensure the pump is sufficiently immersed in the liquid, deeper than the minimum water level.
M
Megan MillerAug 16, 2025
Why is the pumping capacity too low in my Kärcher BP 2 Cistern?
- B
  Beverly DaltonAug 17, 2025
  The pumping capacity of your Kärcher Water Pump depends on the flow height, hose diameter, and hose length. Maintain the maximum flow height as indicated in the technical data. If necessary, use a different hose diameter or hose length.

Kärcher BP 2 Cistern Specifications

General

Flow rate	5700 l/h
Grain size	1.5 mm
Maximum delivery height	32 m
Maximum operating pressure	3.2 bar
AC input voltage	230 V
AC input frequency	50 Hz
Proper use	Garden
Product color	Black, Metallic, Yellow
Immersible	-
Cable length	10 m
Dimensions (WxDxH)	130 x 130 x 445 mm