Do you have a question about the Kärcher BP 3 Home and is the answer not in the manual?
Type | Booster pump |
---|---|
Proper use | Water purification |
Product color | Black, Yellow |
Housing material | Stainless steel |
Suitable for indoor use | Yes |
Suitable for outdoor use | - |
Flow rate | 3000 l/h |
Maximum suction height | 7 m |
Maximum delivery height | 36 m |
Maximum operating pressure | 3.6 bar |
Maximum input water temperature | 35 °C |
Power cable type | H05RN-F |
Power source type | AC |
Cable length | 1 m |
Connecting thread type | G1 |
Depth | 450 mm |
---|---|
Width | 270 mm |
Height | 550 mm |
Weight | 11300 g |
Details on correct application of the appliance for private households, not for commercial use.
Lists the types of fluids suitable for use with the appliance, including water sources.
Instructions for recycling packaging material and disposing of old appliances responsibly.
Information on finding current details about ingredients used in the product.
Identifies and explains the components of the appliance as shown in Illustration A.
Step-by-step guide for initial setup and connection, including pressure checks.
Instructions on starting and operating the pump after permanent installation.
Basic cleaning and rinsing procedures for the pump after use.
Scheduled checks for air pressure in the storage boiler and other maintenance tasks.
Guidance on securing the appliance to prevent shifting or tipping during transport.
Instructions for properly draining and storing the appliance, preferably in a frost-free area.
Diagnoses issues when the pump is running but not moving water.
Addresses problems with the pump failing to start or stopping unexpectedly during operation.
Investigates causes for the pump repeatedly switching off and on, often due to overheating.
Explains why the motor might start again immediately after being switched off.
Troubleshoots reduced water flow or low transport volume from the pump.
Addresses unusual vibrating noises during water extraction.