EasyManua.ls Logo

Kärcher BR530 - Tilting the Suction Bar; Maintenance Procedures; Maintenance Schedule; Care and Maintenance

Kärcher BR530
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English Operating Instructions BR/BD 530/530 XL
23
Tilting the suction bar
If the suction result is unsatisfactory, the
straight suction bar can be tilted.
n Loosen the wing nuts.
n Tilt the suction bar.
n Tighten the wing nuts.
Care and maintenance
Risk of injury!
Before working on the unit, always
set the master switch to “O” and pull out the
mains plug.
n Drain off and dispose of dirty water and
any residual cleaning liquid.
Maintenance schedule
After work
Caution!
Do not spray the unit with water or
use any aggressive detergents.
n Drain off the dirty water.
n Rinse out the dirty-water tank with fresh
water.
n Clean the outside of the unit.
n Check the fluff strainer and, if required,
clean.
n Remove the squeegee blades, check for
wear and, if required, replace.
n Check the brushes for wear and, if
required, replace.
Monthly
n Check the condition of the container
cover seals and, if required, replace.
Annually
n Have customer service conduct the
stipulated inspection.
Maintenance procedures
Replacing the squeegee blades
n Loosen the star knobs.
n Remove the squeegee blades.
n Attach the new squeegee blades.
n Tighten the star knobs.
Replacing the roller brushes
n Loosen the wing nuts.
n Remove the bearing cover.
!

Related product manuals