33
*Exclusive scenario of the Wash Jet model
3. Hose holder assembly
Screw the hose holder to the main unit firmly (2 M4*16mm screws).
Note: The screws are packed along with the manual. Please check and look for them
during unpacking (tool is not supplied).
4. Assembling the power cord holder and gun holder
Slide down the power cord holder on the main unit.
Slide down the gun holder on the left side of the machine.
5. Wheel assembly.*
Align the wheels with their respective cavitys, mount them to the body of the machine
and apply pressure to join both components so that there is no gap between the
components.
To Next Page
Loading...
