36
2. Turn the high pressure washer switch to the “ON/I” position, then squeeze the
trigger.
Observation: Before pressing the trigger, make sure the lock switch is in the
“unlocked” position.
WARNING: Do not turn on the machine without connecting and opening the water
supply point, as this could damage the high pressure seals and reduce the life of the
pump.
3. Select the correct nozzles
Press the trigger and the high pressure water jet will come out. You can adjust the
adjustable nozzle between a Fan jet (1) and a Straight Jet (2).
WARNING: High pressure jets can be dangerous if used incorrectly. The jet should not
be directed towards people, live electrical equipment or the equipment itself.
WARNING: Do not direct the jet at yourself or other people to clean clothing or shoes.
WARNING: The spray gun must have the safety lock on when changing nozzles.
Fan jet (1)
Straight jet (2)
4. Cleaning
Use the nozzle at a distance of 30 to 60 centimeters from the surface and approach
carefully until you reach the desired position so that too much spray does not damage
the surface.
WARNING: Do not connect the machine to water supply points that are dirty, oxidized,
blocked or corroded. (This includes crystal clear liquids, plant food or fertilizers, etc.)
To Next Page
Loading...
