Kärcher HDS 13/35 De Tr1 User Manual (English)

Other manuals for Kärcher HDS 13/35 De Tr1

Questions and Answers:

A
alfred43Sep 5, 2025
What to do if my Kärcher Pressure Washer shows ERROR 11 Flame sensor (no flame)?
- G
  Gerald RobinsonSep 5, 2025
  If your Kärcher Pressure Washer shows ERROR 11, indicating a flame sensor issue, start by cleaning the nozzle holder. Next, inspect the ignition electrodes for improper setup or dirt and adjust or clean them accordingly. If the problem persists, the photo cell of the flame monitoring might be defective and require replacement. Other potential causes include a defective fuel pump (replace it), a defective solenoid valve (replace it), a choked fuel filter (replace it), or a faulty ignition transformer (replace it).
E
erin44Sep 6, 2025
How to fix ERROR 3 Temperature water inlet or cooling water on Kärcher Pressure Washer?
- L
  Larry HarrisSep 6, 2025
  If your Kärcher Pressure Washer displays ERROR 3, which relates to the temperature of the water inlet or cooling water, there could be several reasons. If the water temperature in the float container is too high due to circulation mode, allow the water to cool down or drain it. If the temperature sensor has switched off the device, turn the appliance off and back on; if the malfunction re-occurs, contact customer service. Other causes may include a defective temperature sensor (replace it), low coolant level (fill coolant into the expansion tank), insufficient V-belt tension on the fan (retension the V-belt), or a defective temperature sensor on the motor (replace the temperature sensor).
M
Michele AnthonySep 8, 2025
Why does my Kärcher Pressure Washer show ERROR 9 Emission temperature?
- J
  Jennifer TranSep 8, 2025
  If your Kärcher Pressure Washer displays ERROR 9 related to emission temperature, it could be due to several reasons. The exhaust gas thermostat might have responded and switched off the burner; in this case, switch off the device, allow it to cool down, and restart it. If the malfunction reoccurs, contact customer service. Alternatively, the exhaust gas thermostat could be defective and need replacement. Other potential causes include a wrongly set burner (adjust the burner) or a soiled or calcified heating coil (decarbonise or decalcify the heating coil).
B
Benjamin KennedySep 9, 2025
What causes ERROR 5 Flow switch/pressure switch on Kärcher Pressure Washer?
- M
  Mr. Sean MullinsSep 9, 2025
  If your Kärcher Pressure Washer displays ERROR 5 related to the flow switch or pressure switch, it could be due to several reasons. The flow switch might be defective and need replacement, or the pressure switch could be defective and also need replacement. Additionally, the overflow valve might be defective (replace it), or the check valve in the overflow valve could be defective (replace the check valve). Lastly, the fine filter on the pump head might be soiled (clean the fine filter).