EasyManuals Logo

Kärcher MC 50 User Manual

Kärcher MC 50
Go to English
172 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
– 5
Note
Use normal glycol-based anti-freezing
agents for automobiles.
Observe handling instructions of the anti-
freeze agent manufacturer.
Î Operate device for max. 1 minute until
the pump and conduits are empty.
1 Hose coupling
2 High-pressure cleaner
3 Safety pin
Î Take the high pressure cleaner out of
operation.
Î Disconnect the high pressure cleaner
hoses from the MC 50.
Î Unlock the safety bolt by turning it and
pull it out toward the side.
Î Pull the high pressure cleaner out of the
square pipes of the MC 50.
Î Slide in the safety bolt and lock it by
turning it.
Caution
Risk of injury and damage! Observe the
weight of the appliance when you transport
it.
Î When transporting in vehicles, secure
the appliance according to the guide-
lines from slipping and tipping over.
Caution
Risk of injury and damage! Note the weight
of the appliance in case of storage.
Danger
Risk of injury by inadverently starting appli-
ance. Switch the MC 50 off prior to working
on it and remove the ignition key.
Note
Please dispose off used oil only in the col-
lection points provided for them. Please
hand over old oil, if any, only at such plac-
es. Polluting the environment with used oil
is a punishable offence.
You can sign with your dealer a contract for
regular safety inspection or even sign a
maintenance contract. Please take advice
on this matter.
Î Check all hydraulic hoses and connec-
tions and ensure that they are leak-
proof.
Î Check the high pressure hose for dam-
ages (risk of bursting).
Please arrange for the immediate ex-
change of a damaged high-pressure
hose.
Î Check appliance (pump) for leaks.
3 drops per minute are permitted and
can come out from the lower side of the
appliance. Call Customer Service if
there is heavy leakage.
Î Check oil level Please contact Custom-
er Service immediately if the oil is milky
(water in oil).
Î Clean the sieve in the water connection.
Unpressurize the appliance.
Unscrew lid with filter.
Disconnect the high pressure clean-
er from the MC 50.
Transport
Storage
Maintenance and care
Safety inspection/ maintenance
contract
Before each use
Weekly
15EN

Table of Contents

Other manuals for Kärcher MC 50

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kärcher MC 50 and is the answer not in the manual?

Kärcher MC 50 Specifications

General IconGeneral
BrandKärcher
ModelMC 50
CategoryPressure Washer
LanguageEnglish

Related product manuals