– 7
We herewith declare that we have compiled
the technical documentation for the incom-
plete machine listed in the following as per
the EU directive 2006/42/EG (+2009/127/
EG) Appendix VII Part B and that the ma-
chine meets the following requirements of
this directive:
Appendix I Items 1.1, 1.2, 1.3, 1.4, 1.5, 1.6
and 1.7.
This declaration shall cease to be valid if
the incomplete machine is modified without
our prior approval..
Authorities can request relevant docu-
ments about the imcomplete machine from
the documentation official. The documents
are transmitted via E-Mail.
Prior to starting up or installing the incom-
plete machine you must make sure that the
machine, in which the incomplete machine
will be run or into which it will be installed,
complies with the EU machine directive
2006/42/EG (+2009/127/EG). Further infor-
mation about this is available in the EU con-
formity declaration for this machine.
The undersigned act on behalf and under
the power of attorney of the company man-
agement.
Authorised Documentation Representative
S. Reiser
Alfred Kärcher GmbH Co. KG
Alfred-Kärcher-Str. 28 - 40
71364 Winnenden (Germany)
Phone: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2010/12/01
Installation declaration
Product: Attachment kit
High-pressure cleaner
Type: 2.851-116.7
Applied harmonized standards
With reference
to:
EN 60335–2–79
CEO
Head of Approbation
17EN
To Next Page
Loading...
Need help?
General
