Kärcher SV 7 Operating Instructions

– 11
Always place the machine in a horizontal
position during operation.
몇 CAUTION
Risk of injury due to accidental
discharge of steam.
 Ensure that the release but-
ton is always activated by the
stop position during interrup-
tions of work or when the ap-
pliance is not supervised.
Note
In order to continue the steam release, de-
activate the stop position by pushing the
button again.
Illustration
 Open the flap of the appliance connec-
tor.
 Tightly insert the steam plug into the ap-
pliance connector. The plug must click
into place audibly.
Illustration
 Insert the mains plug into the socket.
Illustration
 All accessories can directly be attached
to the handle or to the steam suction
pipes.
Illustration
 In order to connect the two extension
tubes with each other, the direction of
the arrow must be observed.
Illustration
 Connect the handle or the extension
tube to the desired accessory.
Illustration
 The locking lever is in the middle, (posi-
tion open).
 To secure the accessories: Turn the
locking lever to the right and slide it
down (position closed).
 Check for secure connection prior to us-
ing the accessories.
 To disconnect the accessories: Slide up
the locking lever and turn it to the left.
 The locking lever is now in the middle
again, the accessories can be pulled
apart.
You can use this appliance to vacuum dust
as well as spilled liquids.
몇 CAUTION
Risk of injury due to accidental
discharge of steam.
 Activate release button.
Illustration
 Push the main switch.
The first level of the indicator lamps for
the suction performance starts to flash.
Illustration
 Briefly push the suction button on the
handle.
The suction operation starts with the
minimum performance. The first level of
the indicator lamps for the suction per-
formance is continuously on.
 End suction operation: Press suction
button again briefly.
Note
When you restart the suction function, the
machine starts at with the previously select-
ed suction performance.
The setting of the suction performance de-
pends on the surface to be cleaned.
Illustration
 Push the suction button and hold it
down.
 The suction performance initially in-
creases continuously and then de-
creases continuously after reaching the
maximum power.
This is indicated by the indicator lamps
for the suction performance.
Operation
Connecting the accessories
Accessories for steaming and
vacuuming
Vacuum cleaning operation
Setting the vacuum cleaning
performance
25EN

Kärcher SV 7 Specifications

General

Type	Cylinder steam cleaner
Capacity	1.2 L
Cord length	6 m
Product color	Black, Silver, Yellow
Boiler power	1100 W
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Ready time	5 min
Steam pressure	4 bar
Adjustable steam	Yes
Cleaning surfaces	Carpet, Hard floor, Laminate, Tiles
Continuous steam performance	65 g/min
Steam-ready light	-

Weight and Dimensions

Depth	510 mm
Width	330 mm
Height	340 mm
Weight	9100 g
Package weight	15600 g