•
If you do not want the menu of a program to automatically appear each
time you insert a program diskette, press RETURN.
•
If the diskette you are copying does not contain a program, press
RETURN.
CM will be written to the disk, and the program will return to the
main menu.
11.
Remove the diskette from drive A.
12.
Remove the new working copy from drive B.
13.
Label it with the appropriate sticker provided in the software package, or
make a label if you are copying a diskette other than a master diskette.
14.
To make working copies of all your master diskettes, put the next diskette
you wish to copy into drive A, and go back to step 5 to repeat the procedure
until all the working copies of the master diskettes are made.
15.
Store the master diskettes in a safe place to be used if you have to copy
them again.
29
To Next Page
Loading...
