ERASING FILES
You can erase files
from the directory of a diskette in one of several ways.
1. Turn on
or reset the computer.
2_ To
erase a file from a diskette in the currently-logged drive, use one of
the following ERAse commands. To erase:
a file by its full name
ERA X.Y
all files with a certain file name
ERA X.*
all files with a certain file type
ERA *.LTR
all files on the current diskette
ERA *.*
(The question will appear:
ALL FILES (Y/N)?
If you want ALL your files erased,
answer y; if you don't want all your
files erased, answer n.)
Be careful
with this command!
3. To erase a file from a diskette in the other drive, use the above com-
mands, but precede the file name with the letter of the other drive followed
by a colon. Example: ERA B:X.Y
39
To Next Page
Loading...
