Need help?Do you have a question about the KB VISION KX-DR01 and is the answer not in the manual?
General| Wireless Standards | IEEE 802.11b/g/n |
|---|---|
| Frequency Band | 2.4 GHz |
| Interface | 1 x 10/100M LAN |
| Wireless Security | WEP, WPA, WPA2 |
| Power Supply | 5V DC |
Diagram showing how the device, card reader, alarm, and PC form an integrated system.
Details the physical connections and ports available on the access control host.
Instructions for booting up the device and entering the admin password.
Covers adding, deleting, and managing users via card, fingerprint, or password.
Details the step-by-step process for adding a new user to the system.
Guides on how to input and confirm a super password for elevated access.
Explains how to remove single users or all users from the system.
Describes the procedure to add additional master cards for user management.
Allows setting unlock periods based on time and day of the week.
Instructions for modifying or adding master cards to the system.
Configures the valid methods for unlocking the door (card, fingerprint, etc.).
Sets the duration the door remains unlocked and the over-time alarm threshold.
Details how to enable/disable various alarm types like intrusion and duress.
Configures the door's operational status (Normal, NO, NC).
Manages device settings like date, time, admin password, and volume.
Configures the network communication settings (IP, subnet, gateway).
Sets the device's operational mode (controller or card reader).
Provides instructions to restart the device.
Displays records of card swiping events.
Shows historical records of system alarms.
Shows device version, MAC, IP, and quantities of users and alarms.
To Next Page