12
To set NO period:
Step 1. In time setup interface, press 【↑】 or 【↓】key to move up and down, select NO
period, and press 【√】key.
Step 2. Input period no., and press 【√】key as follows.
System prompts setup is successful. Period no. is the no. set in card swiping period setup.
4.3.2 Master Card
You can modify or add master card.
Step 1. In A&C setup interface, press 【↑】key or 【↓】key to select master card setup,
and press 【↓】key.
Step 2. Press 【←】key to delete old card no., and input modified card no., or directly
place the card at swiping area for scanning, and press 【√】key, as follows.
System prompts setup is successful.
4.3.3 Unlock Mode
Unlock mode includes card, password, fingerprint, card+password, card+fingerprint, card
or password or fingerprint.
To set:
Step 1. In A&C interface, press【↑】or 【↓】key to move up or down, select unlock mode,
and press【√】. Enter unlock mode setup page.
Step 2. Press【↑】or 【↓】 key to select mode to set, and press 【√】key. When it is
selected, there will be a ○
√
next to the mode.
Master Card Setup
Card No. FFFFFFFF
NO Period Setup
Period No. 255
To Next Page