11
To set holiday period:
Step 1. In time period setup page, press【↑】 or【↓】 key to select holiday period, and
press【√】key.
Step 2. Input period, and press 【√】key. Input any number between 0~127, such as 1.
Step 3. Modify start time, end time and swiping period, and press 【√】key.
System prompts
4.3.1.3 Mode Period
Mode period has four periods per day, from Monday to Sunday, 7 days a week.
To set mode period:
Step 1. In time period setup interface, press 【↑】 or【↓】key, select mode period, and
press【√】. System displays periods of Monday to Sunday.
Step 2. For example select Monday, and press 【√】key.
Step 3. Config period, press 【√】 to select unlock mode of the period
Step 4. Config Tuesday to Sunday periods.
Step 5. Press 【 】key. System asks if save or not.
Step 6. Select YES, and press 【√】key. System says saved successful.
After completion, A&C unlock method will be managed according to the four
periods.
4.3.1.4 NO Period
After user set NO period, A&C will be open during this period.
Mode Period Setup
Mon.
Tue. 00: 00 – 23: 59 Ca/Fw/Fp
Wed. 00: 00 – 23: 59 Ca/Fw/Fp
Thu. 00: 00 – 23: 59 Ca/Fw/Fp
Fri. 00: 00 – 23: 59 Ca/Fw/Fp
Sat.
Sun.
To Next Page