KB VISION KX-DR01 - 4.4.2 Communication Setup

16
4.4.1.3 Talk Volume
You can set device audio volume.
Step 1. In local setup interface, press 【↑】key or 【↓】key, select talk volume setup, and
press 【√】 as follows.
Step 2. Press 【↑】key or 【↓】key, you can adjust volume.
4.4.1.4 Export All Data
You can export device card data, alarm data to a USB disk.
Before exporting, you shall insert a USB disk.
In local setup interface, press 【↑】or 【↓】, select export all data, and press【√】key.
4.4.1.5 Default
To restore default settings:
Step 1. In local setup interface, press 【↑】 or 【↓】key, select default, and press【√】
key.
System asks if to restore or not.
Step 2. Select YES and press 【√】key to restore.
4.4.2 Communication Setup
It sets current access control communication.(Only IP for now)
Step 1. In system settings interface, press【↑】or【↓】key, select communication setup,
and press【√】.
Step 2. Press 【↑】or【↓】key, select IP setup, and press【√】.
Step 3. Modify IP, subnet mask, gateway, and press 【√】 as follows.
Talk Volume Setup