Need help?Do you have a question about the KEB COMBILINE 24Z2F04-1003 and is the answer not in the manual?
General| Brand | KEB |
|---|---|
| Model | COMBILINE 24Z2F04-1003 |
| Category | Water Filtration Systems |
| Language | English |
Explains signal words and symbols used for safety information.
Explains additional symbols used in the manual.
Details compliance with EC declaration of conformity and CE mark.
Outlines warranty and liability conditions for the acquired device.
Provides information on requesting further information and support.
States copyright ownership and usage rights for the documents.
Lists product standards relevant to EMC components.
Lists basic standards related to environmental conditions and protection.
Lists general standards applicable to electrical installations and machinery.
Defines the intended audience and required qualifications for the manual.
Provides guidelines for safely transporting, storing, and using the product.
Details safety precautions and requirements for product installation.
Outlines safety procedures for electrical connections to prevent shock hazards.
Covers safety measures for starting up and operating the device.
Details restrictions and warnings regarding unauthorized repair or modification.
Provides instructions for the proper disposal of electronic devices.
Defines the intended applications and installation environments for the output filters.
Clarifies what constitutes unintended use and its consequences.
Highlights the key features and benefits of the COMBILINE Z2 output filters.
Specifies temperature, humidity, and altitude requirements for operation and storage.
Details mechanical stress limits for vibration and shock during different phases.
Lists acceptable environmental conditions regarding contaminants.
Specifies device classification regarding pollution degree and overvoltage.
Provides mechanical specifications and tightening torques for motor chokes.
Lists electrical parameters like current, inductance, resistance, and power loss.
Details mechanical specifications and tightening torques for capacitor modules.
Lists electrical parameters like max current and capacity for capacitor modules.
Provides specifications for cable sets, including length, cross-section, and current.
Shows recommended combinations of motor chokes, capacitor modules, and cable sets.
Provides physical dimensions and weights for motor chokes of sizes 07 to 12.
Provides physical dimensions and weights for motor chokes of sizes 13 to 19.
Provides physical dimensions and weights for motor chokes of sizes 20 to 22.
Provides physical dimensions and weights for motor chokes of sizes 23 to 30.
Details physical dimensions and weight for capacitor modules housed in an enclosure.
Provides physical dimensions and weight for capacitor modules with an integrated power capacitor.
Details physical dimensions and weight for capacitor modules with two power capacitors.
Details physical dimensions and weight for capacitor modules with three power capacitors.
Details physical dimensions and weight for capacitor modules with four power capacitors.
Provides general guidelines and best practices for wiring connections.
Illustrates the wiring diagram for connecting the motor choke.
Illustrates the wiring diagram for connecting the output filter.
Explains the overtemperature shutdown feature and its connection.
Provides electrical ratings for the NC contact used in temperature monitoring.
Shows how to connect motor chokes of sizes 07 to 12.
Shows how to connect motor chokes of sizes 13 to 19.
Shows how to connect motor chokes of sizes 20 to 22.
Shows how to connect motor chokes of sizes 23 to 30.
Illustrates connecting capacitor modules using M12 screw connections.
Shows how to connect a capacitor module when it is housed.
Illustrates connecting capacitor modules with an integrated power capacitor.
Illustrates connecting capacitor modules with two power capacitors.
Illustrates connecting capacitor modules with three power capacitors.
Illustrates connecting capacitor modules with four power capacitors.
Provides safety instructions and methods for transporting motor chokes from size 23.
Covers considerations for installing components within a control cabinet.
Specifies the recommended installation positions for motor chokes.
Specifies the recommended installation positions for capacitor modules.
Details ventilation requirements for motor chokes of size 25 and above.
Shows required clearances for wall mounting of specific components.
Shows required clearances for floor mounting of specific components.
Explains CE marking and related standards for output filters and modules.
Details UL certification requirements for North American market use.
To Next Page
