KEB COMBIVERT F4-F - LF-Parameter (continued)

GB-26
Parameter Lists
5.2 dr-Parameter
The dr-parameter group contains the motor parameters. Depending
on the selected motor (see LF.04), the dr-parameters are differently
assigned.
‘1 LF.06 = 1 high-resolution on
‘2 After the input of dr.12 the dr-parameters dr.13-19 are recalculated from the motor data.
The dr-parameter dr.20 and 21 are reset again to the default value.
LF.04 = 0:ASM
LF.04 = 1:SSM
‘1 LF.06 = 1 high-resolution on
Gr. No. Name Address P E R Resol. Lower Limit Upper Limit Default Value Unit
dr 00 Rated motor power 2400 0,01 0,00 160,00 4 kW
dr 01 Rated motor speed 2401 E 1 100 15000 1440 rpm
0,1 '1 10 '1 1500 '1
dr 02 Rated motor current 2402 E 0,1 0,1 1,1*IN.01 8 A
dr 03 Rated motor frequency 2403 E 1 20 800 50 Hz
0,1 '1 2 80
dr 04 Rated motor power factor cos phi 2404 E 0,01 0,05 1 0,86 - - -
dr 09 Rated motor torque 2409 R 0,1 - - - - - - - - - Nm
1 '1
dr 10 Max. motor torque 240A R 0,1 - - - - - - - - - Nm
1 '1
dr 12 Rated motor voltage 240C E 1 100 500 400 V
dr 13 Corner speed for max. torque 240D E 0,5 200 6000 dr.12 rpm
0,1 '1 25 '1 750 '1 '2
dr 16 Max. torque at dr.19 2410 E 0,1 0 dr.10 dr.12 Nm
1 '1 '2
dr 19 Corner speed field weakening 2413 E 0,5 200 6000 dr.12 rpm
0,1 '1 25 '1 750 '1 '2
dr 20 Gain factor field wakening 2414 E 0,01 0,10 2,00 1,20 - - -
'2
dr 21 Flux adaptation 2415 E 1 25 250 100 '2 %
Gr. No. Name Address P E R Resol. Lower Limit Upper Limit Default Value Unit
dr 00 Rated motor power 2400 0,01 0,00 160,00 3,53 kW
dr 01 Rated motor speed 2401 E 1 100 15000 1500 rpm
0,1 '1 10 '1 1500 '1
dr 02 Rated motor current 2402 E 0,1 0,1 1,1*IN.01 7.5 A
dr 03 Rated motor frequency 2403 E 1 20 800 75 Hz
0,1 '1 2 80
dr 07 Static continuous current 2407 E 0,1 0,1 1,1*IN.01 1,1* A
dr.02
dr 09 Rated motor torque 2409 E 0,1 0,1 1000,0 7,5 Nm
1 '1 1 '1 10000 '1
dr 10 Max. motor torque 240A E 0,1 0,1 Inv. Inv. Nm
1 '1 1 '1 dependent depentent
dr 17 EMK voltage constant 2411 E 1 0 8000 0 V * rpm
1000
dr 41 Winding resistance Ru-v 240D E 0,1 0,1 100,0 2,6 Ohm
dr 42 Winding inductance Lu-v 2410 E 0,1 0,1 100,0 29,7 mH