GB 56
GB
8. Parameter Description
Error Counter WD
Shows the total number of watchdog errors (Bus) that occur of each
type. The maximum value is 255.
Software ID Version DSP
The software version number and the control software are coded in
this parameter.
Feedback System Channel 2
Shows which feedback system is suited for the inverter.
6= separable incremental encoder output
7= direct incremental encoder output
Software Date DSP
Displays the software date. The day, month and year (but only the
last digit of the year) are shown.
Example: Display = 1507.4
Date = 15.07.94
Feedback System Channel 1
Shows which feedback system is suited for the inverter.
0= incremental encoder
3= Resolver
Error Counter OH
Shows the total number of errors that occur of each type. The
maximum value is 255.
Error Counter OP
Shows the total number of errors that occur of each type. The
maximum value is 255.
To Next Page
Loading...
Need help?
General
