Need help?Do you have a question about the Keeley ECCOS and is the answer not in the manual?
General| Bypass | True Bypass |
|---|---|
| Outputs | 2 x 1/4" |
| Input Impedance | 1M Ohm |
| Weight | 0.8 lbs |
| Delay Time | Up to 1500ms |
| Looper Length | 30 seconds |
| Power | 9V DC, center negative |
| Inputs | 2 x 1/4" |
| Effects | Delay, Looper |
Adjusts delay time manually from 5ms to 1.5 seconds.
Adjusts effect level, blend in delay with your clean guitar tone.
Controls the rate or speed of modulated delay trails, from 0 to 15 Hz.
Depth of Delay Modulation, up to 13ms. Controls chorus-like modulations.
Adjusts the number of delays or repeats. Also a push button switch.
Place the ECCOS in looper mode using the MODE switch or double tapping the FDBK knob.
Press BYPASS to record, tap BYPASS to play, double tap BYPASS to stop.
Tab the BYPASS switch from Play mode to start recording an overdub.
Press and hold the FDBK knob for 1 second to undo the last recording.
Double tap and hold BYPASS to delete the loop. Status and Bypass lights flash twice.
Adjust the volume level of playback with the Looper Level (DEPTH Control).
Double tap BYPASS or tap FDBK once to enter Preset Select Mode.
To Next Page