Keeley ECCOS User Manual

10
SOUND ON SOUND MODE
INDEPENDENT SWITCHING
The ECCOS now features Sound on Sound
Mode! Sound on sound mode lets you record
without erasing the original loop. The volume
of the loops degrade over time, recreating a
vintage reel to reel recording technique. To set
the decay of the loops, hold down the FDBK
knob and adjust the Depth control. This alt
control comes in handy when using Sound on
Sound Mode.
The ECCOS features advanced independent
switching. The Delay or the Looper can be
turned on and off independently. You can start
the Looper with our without a Delay Setting.

Keeley ECCOS Specifications

General

Bypass	True Bypass
Outputs	2 x 1/4"
Input Impedance	1M Ohm
Weight	0.8 lbs
Delay Time	Up to 1500ms
Looper Length	30 seconds
Power	9V DC, center negative
Inputs	2 x 1/4"
Effects	Delay, Looper