Keeley ECCOS User Manual

5
ECCOS DELAY/LOOPER
PRIMARY DELAY CONTROLS
1
1
2
3
4
5
3
2
5
4
TIME - Adjusts delay time manually from 5ms to
1.5 seconds.
BLEND - Adjusts effect level, blend in delay with
your clean guitar tone.
DEPTH - Depth of Delay Modulation, up to 13ms.
Set high to achieve chorus-like modulations.
Turning the depth to zero produces a clean delay
tone.
FEEDBACK - Adjusts the number of delays or
repeats. FDBK is also a push button switch. Tap the
FDBK knob once to enter preset selection mode.
Press and hold FDBK to access secondary controls
like TONE or REGEN, or use the MODE select new
tempo subdivisions. Quickly double tap the FDBK
knob to switch between Looper and Delay modes.
You can even use your foot while playing live!
RATE - This controls the rate or speed of your
modulated delay trails. Setting this slow will create
slightly comb filtered delays. Fast rates can be used
to get rotary speaker effects. The sine wave LFO
modulation goes from 0 to 15 Hz.

Keeley ECCOS Specifications

General

Bypass	True Bypass
Outputs	2 x 1/4"
Input Impedance	1M Ohm
Weight	0.8 lbs
Delay Time	Up to 1500ms
Looper Length	30 seconds
Power	9V DC, center negative
Inputs	2 x 1/4"
Effects	Delay, Looper