Keeley ECCOS User Manual

16
DELAY MODE
Switch to Delay Mode - Toggle MODE switch with your
hand or double tap FDBK knob. You can use your foot
on the FDBK knob when playing live!
Main Delay Controls - TIME, BLEND, FDBK, RATE, DEPTH
ALT DELAY CONTROLS - Press and hold FDBK knob
while turning other knobs to adjust MANUAL, VIBE,
TONE, or REGEN.
Tap Tempo - Press the TAP switch at least 2 times to set
the tempo.
Subdivisions - Press and hold FDBK knob + toggle
MODE switch.
Runaway Feedback Oscillator - Hold TAP for 2+ seconds.
Trails / True Bypass - Hold BYPASS + Hold TAP for 2
seconds.
LOOPER MODE
Switch to Looper Mode - Toggle MODE switch with your
hand or double tap FDBK knob. You can use your foot
on the FDBK knob when playing live!
Start Recording Loop - Tap BYPASS
Start Playback of Loop - Tap BYPASS
Stop Loop - Double tap BYPASS
Play Loop in Reverse - Hold TAP
Play Loop at Half Speed / Normal Speed -
Double tap TAP
Erase Loop - Double tap and hold BYPASS for 1 second
while in Loop Mode.
Trigger Play Once - Tap TAP (Loop must be stopped)
Undo / Redo - Hold FDBK for 1 second
ECCOS QUICK START GUIDE
Jump right in to the ECCOS Delay / Looper
TOGGLE THE MODE SWITCH OR DOUBLE TAP THE FDBK KNOB TO SELECT DELAY OR LOOPER
FOR MORE INFORMATION, VISIT RKFX.COM

Keeley ECCOS Specifications

General

Bypass	True Bypass
Outputs	2 x 1/4"
Input Impedance	1M Ohm
Weight	0.8 lbs
Delay Time	Up to 1500ms
Looper Length	30 seconds
Power	9V DC, center negative
Inputs	2 x 1/4"
Effects	Delay, Looper