Keepower XL - pro - Error and Warning Indications; Common Error Messages; Troubleshooting No Indication

XL - pro
Error indication
Maintenance
Thechargercanbecleanedwithamoistercloth.Runningwateranddeter-
gentcontainedsolventmaynotbeused.
Repairofthechargersmayonlybedonebyanauthorisedshopandthat
includedreplacementofthebatterycables.
The charger is excessive overloaded
in the supply mode
The charger is overloaded in the
supply mode
The charger has lost the mains supply
during charging
The charger needs service because it
have failed during the self testing
No battery is connected
The clamps are shorted
A battery with a voltage over 32V have
been connected
There can be two reasons for no indication in the battery tester during
testing:
• Thebatteryinthecarisdeepdischarged.
• Wrongpolarizationoftheclampsonthebattery.