KEEWAY Rkv200g - Engine Starting Procedure; Running-in Procedure; Riding Safely; Shifting Gear

13
Caution:
Don’t increase the engine speed without any reason
beforeriding.
Shifting Gear
Thesemotorcycles have5 speed whichcan easilyshift by operating
clutchandgearlever.
Picturesbelowshowclutchleverandgearpedal.
Running-in
Themotorcyclerunning-inisfundamentaltoprolongenginelife.
0-100Km
• Fortherst100Km.Performwithcautiononthebrakesandavoid
extremebrakingforlongperiod.
0-500Km
• Fortherst500Km.don’tdriveyourmotorcyclefasterthan80%
ofthelimitshown.
After1000Km
• Speedupgraduallyyourmotorcycleuntilmaximumperformance
hasbeenreached
Engine Starting
1.Turnfuelswitchto“”position
2.Turnkeyswitchto“”position.
3.TheON/OFFpushbuttonmustremainON“”
4.Holdsteeringhandleandthenpresselectricstarterswitch.
5.Itisrecommendedtowarm-uptheenginebeforeridingoff.
Riding
1. Makesuresidestandisliftedupbeforeriding.
1
3
2
4
RKV MANUAL - ARTWORK.indd 13 23/7/2013 11:10:58 AM