Need help?Do you have a question about the KEEWAY RKV125 and is the answer not in the manual?
General| Engine Type | Single cylinder, 4-stroke, air-cooled |
|---|---|
| Fuel System | Carburetor |
| Transmission | 5-speed |
| Front Suspension | Telescopic fork |
| Front Brake | Disc |
| Rear Brake | Drum |
| Cooling System | Air-cooled |
| Seat Height | 770 mm |
| Weight | 135 kg |
| Fuel Tank Capacity | 17 L |
| Rear Suspension | Dual shock absorbers |
Safety precautions for operation.
Technical details of the engine.
Diagnostic procedures for starting issues.
Diagnostic procedures for engine overheating.
Diagnostic procedures for lack of engine power.
Diagnostic procedures for poor engine idle.
Diagnostic procedures for high fuel consumption.
Diagnostic procedures for clutch slippage.
Diagnosis for blue-white smoke from exhaust.
Diagnosis for incomplete clutch separation.
Diagnosis for difficult gear shifting.
Diagnosis for drum brake failure.
Diagnosis for transmission gear jumping.
Diagnosis for hydraulic disc brake failure.
Diagnosis for battery not charging.
Diagnosis for battery draining quickly.
Diagnosis for starting motor not running.
Diagnosis for weak starting motor operation.
Diagnosis for all lights not working.
Procedures for checking and replacing engine oil and filter.
Inspection and replacement of engine oil.
Troubleshooting for battery and charging system issues.
Removal, charging, and inspection of the battery.
Troubleshooting for ignition system problems.
Inspection procedures for ignition components.
Troubleshooting for starting motor issues.
Removal, disassembly, and inspection of the starting motor.
Troubleshooting for braking system issues.
Removal, inspection, and installation of front brake.
Removal, inspection, and installation of rear brake.
Troubleshooting for front wheel and suspension issues.
Disassembly, inspection, and installation of the front wheel.
Removal and installation of the front fork assembly.
Troubleshooting for rear wheel and suspension issues.
Removal, inspection, and installation of the rear wheel.
Troubleshooting for lubrication system issues.
Removal, assembly, and installation of the oil pump.
Troubleshooting for carburetor problems.
Troubleshooting for cylinder head/valve issues.
Removal of the cylinder head.
Troubleshooting for cylinder block and piston issues.
Removal and inspection of the cylinder block.
Removal, inspection, and installation of the piston.
Troubleshooting for clutch problems.
Removal and disassembly of the clutch.
Removal and inspection of crankshaft assembly.
To Next Page
