7.2 Fault Diagnosis
7.2.1 Heavy Steering Handle
Handle bearing damaged
Too low tyre pressure
Tyre leakage
7.2.2 Wobbly Direction Handle
Damaged handle bearing
Not enough tyre pressure.
Front fork bent, front wheel shaft bent.
Distorted and crooked front wheel tyre.
7.2.3 Wobbly Front Wheel
Distorted wheel rim
Worn front wheel bearing
Defective front tyre
7.2.4 Difficult Rotation of Wheel
shaft or bearing seat fault
Braked
7.2.5 Noisy Front Shock Absorber
Friction sound of shock absorber protecting
plate.
Loosened bolts on the shock absorber.
7.3 Front Wheel
7.3.1 Disassembly
Attention:
Stand the motorcycle reliably.
Screw off speedometer mounting bolts and remove speedometer
cable.
Screw off front shaft locknuts.
Remove front shaft (1), take down bearing seat assembly (2) and
front wheel.
Screw off bolts and remove front mudguard and lead wire of odometer.
Remove front brake hose.
Remove oil seal assembly (8) and bearing (3) with an oil seal remover and a bearing remover respectively.
To Next Page
Loading...
