Need help?Do you have a question about the KEEWAY K-LIGHT 125 and is the answer not in the manual?
General| Engine Type | Single cylinder, 4-stroke, air-cooled |
|---|---|
| Max Torque | 8.9 Nm @ 7500 rpm |
| Fuel System | Carburetor |
| Transmission | 5-speed |
| Front Suspension | Telescopic fork |
| Front Brake | Disc |
| Rear Brake | Drum |
| Dry Weight | 144 kg |
| Rear Tyre | 130/90-15 |
| Length | 2140 mm |
| Width | 800 mm |
| Height | 1100 mm |
| Fuel Tank Capacity | 11.8 liters |
| Rear Suspension | Twin shock absorbers |
Owner's responsibility for safe operation and guidelines for safe riding practices.
Importance of protective gear and risks of carbon monoxide exposure.
Guidelines for safely adding cargo and transporting the motorcycle.
Identification of key components on the left and right sides of the motorcycle.
Identification and function of the motorcycle's controls and instruments.
Operation and functions of the key, ignition switch, and steering lock.
Explanation of the multi-function meter unit and indicator lights.
Operation of handlebar controls, clutch lever, brake lever, and gearchange pedal.
Details on the CBS braking system and fuel tank cap operation.
Procedures for seat removal, suspension adjustment, and side stand operation.
Checks for fuel, engine oil, front and rear brakes, and CBS system.
Checks for tyres, drive chain, control cables, and chassis fasteners.
Procedure for starting the engine and changing gears.
Guidelines for engine break-in and tips for fuel efficiency.
Safe parking procedures and precautions.
Overview of maintenance intervals and description of the owner's tool kit.
Procedures for changing engine oil, oil filter, and air filter element.
Maintenance procedures for tyres, brakes, and the drive chain.
Maintenance checks for front fork, steering, wheel bearings, and battery.
Procedure for replacing fuses and general troubleshooting advice.
General guidelines and specific procedures for cleaning the motorcycle.
Instructions for both short-term and long-term motorcycle storage.
Specifications for engine, fuel capacity, and transmission.
Specifications for chassis, tyres, brakes, and suspension system.
Specifications for electrical system voltage, battery, bulbs, and fuses.
Location and importance of vehicle identification numbers and model label.
Purpose of the diagnostic connector and ECU data recording.
Checklist of pre-delivery inspection and testing items.
Details on warranty terms and responsibilities of dealer and customer.
Details on conditions and exclusions not covered by the vehicle warranty.
Guidelines for routine maintenance schedules and service receipts.
To Next Page
