KEEWAY K-LIGHT 125 - Replacing the Taillight;Stop Light

6-33
EN
6
Periodic maintenance and adjustment
Replacement of position indicator light
1. Open the headlight group.
2. Remove the bulb burnt and replace it
with a new one (E).
E
E. Position indicator light bulb
3. Reinstall the headlight group.
Replacing the taillight/stop light
1. Remove the taillight/stop light lens by
loosening the screws (A).
A
2. Remove the burnt bulb by pressing it
and rotating counter-clockwise.
3. Insert a new bulb in the holder, press it
and rotate clockwise until it stops.
4. Install the lens with the screws (A).
COPY - Moto GB - Grant Martland - grantmartland@motogb.co.uk