6-15
EN
6
Periodic maintenance and adjustment
Air lter element
The air lter element must be replaced at
the intervals specied in the periodic main-
tenance and lubrication chart.
Replacing the air lter element
1. Place the vehicle on a at surface and
keep it upright.
2. Remove the seat (3-12).
3. Remove the air lter cover with the rel-
evant screws.
4. Pull the air lter element out and the
two corresponding meshes.
5. Replace the air lter with a new one.
6. Insert a new air lter element into the
air lter case following the disassembly
sequence.
7. Install the air lter case cover by install-
ing the screws.
Checking the engine idling speed
Check the engine idling speed and, if nec-
essary, have it corrected by a Keeway deal-
er.
Engine idling speed:
1400-1600 rpm
COPY - Moto GB - Grant Martland - grantmartland@motogb.co.uk
To Next Page
