EasyManua.ls Logo

KEEWAY K-LIGHT 125 - Brake;Tail Light and the Turn Signal Lights; Headlight; Light; Replacing the License Plate

KEEWAY K-LIGHT 125
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6-31
EN
6
Periodic maintenance and adjustment
Brake/tail light and the turn signal
lights
This model is equipped with brake/tail light
(A) and turn signal lights (B).
If the lights do not come on, have a Keeway
dealer check the vehicle.
B
A
A. Brake/tail light
B. Turn signal lights
Headlight
This model is equipped with front position
indicator light (A) and turn signal lights (B).
If the lights do not come on, have a Keeway
dealer check the vehicle.
B
A
Replacing the license plate
light
1. Remove the license plate light holder
cable (complete with light) by pulling
it out.
2. Remove the burnt bulb by pulling it
out.
3. Insert a new bulb into the holder with
the cable.
4. Mount the holder with the cable (com-
plete with light) by pressing it.
COPY - Moto GB - Grant Martland - grantmartland@motogb.co.uk

Table of Contents

Related product manuals