KEEWAY RKV125 User Manual

assembly 40 Front mudguard right bracket I assembly
VII Front Wheel/Front Suspension
Preparatory data-----------------7.1
Fault diagnosis------------------7.2
Front wheel----------------------7.3
Control assembly---------------7.4
Front fork assembly------------7.5
7.1 Preparatory Data
Precautions on operation
Before removing the front wheel, lift and support the bottom of motorcycle with a jack or other available device. The
front wheel is off the ground. Take care not to rotate the wheel reversely.
Attention: Please do not let oil contaminate braking shoe, braking shoe assembly and brake disc.
Basic data of the motorcycle as a whole
Measuring
position
Item
Standard
value(mm)
Service
Limit(mm)
Front
wheel
shaft
Curvature
0.2
Front
wheel
Wheel
shimmy
Longitudinal
2.0
Transversal
Within 1.0
2.0
Tightening torque Tools
Upper bracket assembly mounting bolt 40-60 N·m Bearing remover
Front wheel shaft locknut 55-62 N·m Locknut wrench
Front shock absorber mounting bolt 37-44 N·m

KEEWAY RKV125 Specifications

General

Engine Type	Single cylinder, 4-stroke, air-cooled
Fuel System	Carburetor
Transmission	5-speed
Front Suspension	Telescopic fork
Front Brake	Disc
Rear Brake	Drum
Cooling System	Air-cooled
Seat Height	770 mm
Weight	135 kg
Fuel Tank Capacity	17 L
Rear Suspension	Dual shock absorbers