Wheel Rim/Tyre
Check if there is crack, nails and similar sharp objects, and other injuries on the tyres.
Inspect pneumatic pressure of tyres.
* Attention
Measure cold inflation tyre pressure
Specified air pressure Unit: Kpa
Tyre Specifications
Check if lock nut of front shaft is loosened.
Check if lock nut of rear shaft is loosened.
If loosened, tighten it to specified torque.
Tightening torque: Front shaft lock nut 40-60 N·m
Rear shaft lock nut 85-98 N·m
Steering Stem Bearing and Handle Fixation
Move the left and right handle and check if lead wires disturb it.
Rotate front wheel and confirm handle can move smoothly.
If the handle does not move smoothly and is loosened, check steering
stem bearing.
To Next Page
Loading...
